Six things you should never vacuum unless you want to destroy your Dyson – Which one? News


It’s life administration day and the cleanup is in full swing. You pull out your trusty vacuum, ready to suck up all the dust and debris for the week. But nothing is sucked up and your vacuum cleaner makes a tense and desperate sound. What’s wrong ? Well, chances are you sucked in something you shouldn’t have.

Poor suction and blocked filters were the most common problem reported by vacuum cleaner owners in our 2019 reliability survey. They account for nearly a fifth of all reported defects in corded and cordless vacuums.

This can usually be fixed with regular maintenance, such as keeping your floor head and filters clean and emptying the vacuum regularly.

You can also greatly reduce the risk if you remember that some household spills, however tempting to vacuum them up, are like kryptonite to your vacuum cleaner – Dyson or otherwise.

We’ve picked out six common spills that could damage or clog your vacuum and tell you why cleaning them the old-fashioned way is better if you want your vacuum to last.



1. Soil and plant debris

Whether it’s shoes on the carpet or funny cats, a little dirt or grime on the floor is a common annoyance in any home. Your vacuum can make it all go away, right?

Wrong. The pushing force and weight of your vacuum will likely push dirt deeper into your carpet and could even stain it. Plant debris that has fallen from houseplants can also easily clog your machine, especially if it is damp. The leaves can also stain your carpet.

What to do instead

Sweep away visible dirt, dry mud, and fallen leaves to keep them from going down instead of up. It’s a task for your dustpan and your brush.


The five best vacuums for 2020 – see our favourites, including the best pet and car vacuums


2. Sharp objects

If you’ve dropped a glass, it can be very tempting to vacuum the surfaces near the breakage to make sure you catch all the little sharp bits that can cut your hands, feet, or your pets paws. .

But vacuuming broken glass will damage your vacuum cleaner. Tiny shards can get lodged in the hose, motor, and if you’re using a bagged vacuum, they can tear the bag, potentially causing anything inside to overflow.

What to do instead

Sweeping the glass is the best approach, followed by dabbing the surfaces with damp paper towel to pick up any tiny shards you might miss. Be careful and be patient. You need to make sure you have it all.

3. Ashes and sawdust

Ash is a real pain to clean up, especially if you had a spill while emptying the fire grate. It’s the same with the countless particles of sawdust and gravel you get during a construction project.

But you might want to think twice before vacuuming up all the remaining ash and sawdust. Ashes and sawdust contain dust particles so fine that even a small amount will totally block your filters and drop suction.

What to do instead

Even sweeping these things can send ultra-fine dust into the air, which can irritate your lungs, so be careful. A handy trick to keep it at bay is to dampen it before sweeping it up with a dustpan and brush.

They’re not meant for ashes, but the best vacuums will remove fine dust and pollen particles in your home. Find out how our rigorous testing reveals leaders in dust collection, in our guide to how we test vacuums.

4. Liquids

You can buy “wet and dry” models that are specifically designed to pick up wet liquids and debris such as used coffee grounds, but that’s definitely not a chore for your everyday vacuum.

Vacuuming wet objects is a surefire way to clog your vacuum, as wet objects will clog the tube and block the filter. Vacuuming up liquids will also make everything inside wet and invite the dust you vacuum up afterwards to collect and collect in a dirty, wet mess, which can also become moldy.

Sucking liquids into an electrical device such as a vacuum cleaner is also a safety risk and can cause electrical faults in the machine that will put it out of commission for good.

What to do instead

Use a paper towel, cloth or mop to wipe up spilled liquids. This is no job for your vacuum cleaner.

5. Small objects

Just because it can be picked up by your vacuum doesn’t mean it should be.

Picking up small bits of debris isn’t a problem with most vacuums, but you should keep an eye out for anything sharp and larger than bits of dry cereal or small bits of gravel. Larger objects can block and damage the interior.

Common culprits are objects such as small coins, paper clips and pins – not only can they get caught in the brush, but their hard or sharp edges can crack or puncture your vacuum cleaner’s internal tube or motor. incoming.

It might be tempting to just vacuum them up instead of picking them up, but those aren’t the things your vacuum is designed for. He will thank you for picking them up yourself. Just like you, when you don’t have to spend hundreds of dollars on a new vacuum cleaner.

6. Sticky stuff

It does what it says on the tin. It sticks to stuff. It sticks the bristles of your dusting brush together, clogs the filter and stalls the motor.

What’s worse is that sticky things like syrup, glitter, or glue also get hot in your vacuum when stuck and may melt. This is certain to break the motor and render your vacuum cleaner both unsafe and unusable.

What to do instead

A damp, soapy cloth is the only way to handle this kind of mess. And if there’s glue in your carpet, distilled white vinegar can help loosen it.

For more tips on keeping your vacuum cleaner in top working order, check out our vacuum cleaner maintenance guide.

Previous Aer Lingus restores regional connectivity between Belfast and Birmingham / Manchester
Next Manchester economy poised for a long road to recovery before pandemic despite business optimism